Fittings For 6 & 4 mm OD Tube
| MODELS | Technical Specifications |
|---|---|
| LB – 6 (M10x1) | Male thread M10X1 (for 6mm OD Tube) used for right angle connection of tube. |
| MODELS | Technical Specifications |
|---|---|
| LEB – 4 | For joining two tubes at right angle of 6mm OD & 4 mm OD tube. |
| LEB – 6 | For joining two tubes at right angle of 6mm OD & 6 mm OD tube. |
| MODELS | Technical Specifications |
|---|---|
| LT – 4 | For dividing main line into Three lines of 4 mm OD tube. |
| LT – 6 | For dividing main line into Three lines of 6 mm OD tube. |
| MODELS | Technical Specifications |
|---|---|
| LCR – 4 | For dividing main line into Four lines of 4 mm OD tube. |
| LCR – 6 | For dividing main line into Four lines of 6 mm OD tube. |
| MODELS | Technical Specifications |
|---|---|
| LC – 4 | For joining two tubes of 4mm OD. tube. |
| LC – 6 | For joining two tubes of 6mm OD. Tube. |
| MODELS | Technical Specifications |
|---|---|
| LE-4T ( 1 /8”BSP or M8x1) | Male threa1d /8” BSP (taper thread ) for right angle connection of lubrication point with Respective female tapping i.e. for 4mm OD tube. |
| LE – 6T ( 1 /8”BSP ) | Male threa1d /8” BSP (taper thread ) for right angle connection of lubrication point with Respective female tapping i.e. for 6mm OD tube. |
| MODELS | Technical Specifications |
|---|---|
| LB – 4( 1 /8”BSP or M8x1) | Male thread M8x11 &/8” BSP used for right angle turn from end point of M/c |
| MODELS | Technical Specifications |
|---|---|
| LSC-4T ( 1 /8”BSP or M8x1) | To connect 4mm OD tube at end point of Machine. |
| LSC-4T ( 1 /4”BSP) | To connect 4mm OD tube at end point of Machine. |
| LSC-6T ( 1 /8”BSP or M8x1) | To connect 6mm OD tube at end point of Machine |
| LSC-6T ( 1 /4”BSP) | To connect 6mm OD tube at end point of Machine. |
| MODELS | Technical Specifications |
|---|---|
| LC – 4 – 1 | To clamp Single 4mm OD tube. |
| LC – 4 – 2 | To clamp Double 4mm OD tubes. |
| LC – 4 – 3 | To clamp Triple 4mm OD tubes. |
| LC – 6 – 1 | To clamp Single 6mm OD tube. |
| LC -10 -1 | To clamp Single10mm OD tube. |
| MODELS | Technical Specifications |
|---|---|
| M5 x 8 | For fixing Clamps, Tee Blocks cross Blocks, manifolds etc. |
| M5 x 20 | For fixing Clamps, Tee Blocks cross Blocks, manifolds etc. |
| M5 x 30 | For fixing Clamps, Tee Blocks cross Blocks, manifolds etc. |
| MODELS | Technical Specifications |
|---|---|
| LS – 4 | For solderless connection of 4mm OD tube. |
| LS – 6 | For solderless connection of 6MM OD tube. |
| MODELS | Technical Specifications |
|---|---|
| LC – 4 (Brass) | Material brass , ID – 4mm & 6mm Material All./ Brass/ M.S. ID -10mm. |
| LC – 6 (Brass) | Material brass , ID – 4mm & 6mm Material All./ Brass/ M.S. ID -10mm. |
| LC – 10 (Aluminium) | Material (Aluminium , ID – 4mm & 6mm Material All./ Brass/ M.S. ID -10mm. |
| MODELS | Technical Specifications |
|---|---|
| SW – 8 | Material Copper , ID – 8mm. |
| SW – 10 | Material Copper , ID – 10mm. |
| SW – 1/4” | Material Copper , ID – 15mm. |
A Source of Lubrication Systems
We, Lub Systems Pvt. Ltd., Believes In Quality And Reliability For Superior Customer Satisfaction.
Contact Info
B/H Radhe Weigh Bridge, Plot No. 27, Opp. Gate 1, Metoda G.I.D.C., Rajkot (Guj)
© Copyright 2024 Lub Systems Pvt. Ltd.
All Rights Reserved. Powered by IndiaFinds.